Menu
| RIM 108 corrosion inhibitor is a water-soluble, film-forming product designed to give excellent corrosion protection in topside oil and gas production systems and in pipelines. RIM 108 has been designed to give a lew level of environmental impact when compared to more commonly applied corrosion inhibitors. It has been widely used in several offshore fields in the North Sea, Middle East and Asia Pacific. | |
| Typical Physical Properties | Appearance - Clear, dark brown liquid Density 1.03 - 1,07 g/cm3@ 20XIM Pour point - <-10°C Flash point - .100° PH, concentrated product - 3.5 -4.5 Solubility - Water |
| Applications | RIM 108 corrosion inhibitor is effective against C02 corrosion, as well as H2S corrosion. The product is water-soluble and will partition readily to the water phase. The environmental concerns that are associated with the use of some water-soluble corrosion inhibitors are not a concern for this product. RIM 108 inhibitor has an extremely low marine toxicity, does not have a tendency to bioaccumulation and is readily biodegradable. This product has shown good effectiveness in comparative tests performed both in our own laboratories and in third party evaluations. Continuous treatment with 1 to 5ppm of RIM 108 inhibitor is recommended based upon the total liquid volume, if the water cut is below 5%. The recommended dosage is 20 to 50 ppm, based on water volume, if the water cutis above 5%. Optimization of treatment should be performed according to corrosion monitoring results. |